![](/images/new-backgrounds/1157086/157086345x1.webp)
Precautions When Installing Printer Options
DISCONNECT THE POWER CORD:
Never remove the printer control board while the printer is plugged in.
To avoid the possibility of an electrical shock, always disconnect the power cord when installing or removing ANY internal or external printer option.
DISCHARGE STATIC ELECTRICITY:
The control board and internal printer options (Memory and PS DIMMs, Network cards) are sensitive to static electricity. Before installing or removing an internal option, discharge static electricity from your body by touching something metal, such as the metal back plate on any device plugged into a grounded power source. If you walk round before finishing installation, discharge any static electricity once again.
ORDER THE ITEMS:
Check the order number of the items you want purchase. Refer to the table below.
Item | Order number | |
|
| |
Memory DIMM | ||
|
| MB) |
|
| MB) |
| ||
|
| |
PostScript DIMM | ||
|
|
|
Ethernet 10/100 Base TX |
|
|
(Internal) |
|
|
|
|
|
Ethernet 10/100 Base TX + |
| |
802.11b Wireless Lan (Internal) |
|
|
|
| |
|
|
|
D.2 INSTALLING PRINTER OPTIONS