3Prepare a stack of paper for loading by flexing or fanning the paper back and forth. Straighten the edges on a level surface.

4Place paper on the centre of the tray with the print side face up. Pay attention to the paper limit mark on the left inside wall of the tray. Paper overloading may cause paper jams.

If you want to print on previously printed paper from the Multi-Purpose Tray, the printed side should be facing down with an uncurled edge to the printer. If you experience problems with paper feed, turn the paper around.

NOTE: Make sure that you have not loaded too much print material. The print material buckles if you load a stack that is too deep or push it in too far.

3.10 USING PRINT MATERIALS

Page 61
Image 61
Samsung ML-2251N, ML-2252W, ML-2250 manual Using Print Materials