the right pane, double-click Wireless Zero Configuration and check that Startup Type is configured to Automatic, and the Service status is Started.

Q6 When connecting to a computer-to-computer (Ad Hoc) network, I cannot connect to another computer connected to the same computer-to-computer network.

A1 Click the Refresh button to search for AP’s again. (A link to the Refresh button is required)

A2 Make sure that the security settings and network name of the computer-to- computer (Ad Hoc) network is correct.

A3 Check the TCP/IP properties of the computers to be connected through the computer-to-computer (Ad Hoc) network. All of the computers to be connected through a computer-to-computer (Ad Hoc) network should be configured so that their IP addresses are within the same subnet range.

-If the IP address is configured to DHCP (Obtain an IP address automatically) in TCP/IP properties, IP address is configured within the same subnet range automatically.

-If the IP address is configured to static IP in TCP/IP properties, select Use the following IP address in the TCP/IP properties of the wireless adapter, configure IP address:10.0.0.1~10.0.0.254, and Subnet mask: 255.255.0.0, and then try again.

Q7 The network does not operate properly when both the wireless and the wired network connections are simultaneously configured with the same IP address.

AYou cannot use the wireless and the wired network connections using the same IP address simultaneously. To use either the wireless or the wired network in turn with the same IP address, you have to Disable whichever network device will not be using in the network connection of the Control Panel.

Q8 The wireless LAN does not operate properly when there are other products operating in the 2.4GHz band.

ACurrently, both the IEEE 802.11b and IEEE 802.11g devices are using the ISM (industrial, scientific, and medical) band.

Therefore some channel interference may happen when there are other devices

Troubleshooting 97