Setting the Sound to Digital Sound Output on the Computer

Since the sound of the computer is set to Digital Output by default when purchasing the computer, additional settings are not required. You can confirm the setting as follows.

1 Double-click the Volume Control () in the notification area of the Taskbar.

2 In the Master Volume window, make sure the SPDIF mute box is unchecked.

Selecting Digital Output in the DVD Player Program

Since the sound setting is set to Digital Output by default, you do not additionally need to configure it for digital output. You can confirm your settings as follows.

1 If the CyberLink PowerDVD program is not installed, install the program using the system software media (or additional CD depending on the computer model).

2 Launch CyberLink PowerDVD and click Configure.

3 Change the Speaker Environment value to Use S/ PDIF in the Audio tab.

4 Insert and play a DVD title. You can listen to S/PDIF sound.

For some DVD titles, you can listen to more realistic sound if you additionally select S/PDIF from the Setup

Note menu of the DVD title.

62

Page 63
Image 63
Samsung NP-Q45AV01/SPL manual Setting the Sound to Digital Sound Output on the Computer