
QWhen I connect a projector, and change the setting to display screen image on both the LCD and the projector by pressing Fn + ( ) keys, screen is not displayed properly.
APress Fn + () keys once again. If the same problem continues, it means the projector cannot support the resolution. Lower the resolution to 1024 x 768.
QThe Taskbar on the bottom of the screen does not appear when a projector is used as the display device.
AThis may happen, if the projector does not support LCD resolution. In this case change the resolution to 1024 x 768 (recommended) on your computer.
QSwitching the
APressing the <Alt>+<Enter> keys using an USB keyboard, may cause the key input to be recognized as multiple key inputs depending on the keyboard input recognition time. In this case, the
QThe shortcut icons are not displayed on the
screen even if I press the shortcut key.
AThe shortcut icons only appear when the Easy Display Manager program is installed.
QI cannot set up Dual View properly. (For Intel Graphics only.)
AThis may happen when Clone mode is selected for an external monitor. Press the <Fn>+<F4> key combination to select LCD and try to set up Dual
View again.
QThe screen is rotated, but I cannot return it to the original orientation.
AThis may happen when you have used the screen pivot function or pressed a wrong key while using the computer. For nVidia Graphics,
QThe color is strange when the picture is displayed on the connected monitor (or projector).
ACheck the monitor signal cable connection and reconnect the cable.