With the water dispenser, you can obtain chilled water easily without opening the refrigerator door.
• Lift up the Can Carry ( 1 ).
• | Lift up and pull out the | 1 |
| ||
| water tank ( 2 ). |
|
Hold the handgrips on | 2 | |
| ||
| both sides to lift out the |
|
| water tank. |
|
Clean the inside of water tank before using it for | ||
| the first time. |
|
•Fill the water tank with water, ensuring that it is in a stable position, allowing for the extended water supply outlet.
• Method 1.
Round lid
Water tank
Dispenser cock
• Method 2.
When assembling the water tank after CAUTION cleaning, make sure the Dispenser is well
sealed. It may cause water leak.
26_ operating
•Close the refrigerator door after fitting the water tank.
Fix water tank to the CAUTION fridge door tightly.
If not, water tank may not be operate correctly.
Do not use the refrigerator without the water tank. If not, it may cause an efficiency problem.
Do not fill anything other than water as CAUTION mineral water or purified water in the
water tank.
•Place a glass underneath the water outlet and push gently against the dispenser lever with your glass.
Make sure the glass is in line with the dispenser to prevent the water from bouncing out.
Check that the locking device is set to
CAUTION “UNLOCK”.
Water can only be dispensed on this setting.
Dispenser Lever
LOCK UNLOCK
REMOVING THE INTERIOR PARTSWhen assembling, put fridge shelves in CAUTION the correct position and do not put them
upside down. It may cause a personal injury or material damage.
When you put the shelves back, make sure the side with the label “Front” on it face the front of the refrigerator.
2014. 1. 9. �� 4:03 |