6.Select appropriate option and time.
•Scan Power Save: Turns off the scanner lamp under the glass.
•Low Power Save: Keeps the temperature of the fuser unit under 125 °C, and turns off the fans within the machine except a core fan for the fuser unit.
•Power Save: Turns off all the fans even for the fuser unit after certain time.
7.Press OK.
Setting the default tray and paper
You can select the tray and paper you would like to keep using for printing job. (See "General settings" on page 84.)
1.Press Machine Setup on the control panel.
2.Press Admin Setting.
3.When the login message appears, enter password with number keypad and press OK. (See "Setting the authentication password" on page 29.)
4.Press the General tab.
5.Press the down arrow to switch the screen and press Tray Management.
6.Select tray and its options such as paper size and type.
7.Press OK.
If the optional tray is not installed, the tray options on the screen is grayed out.
Changing the default settings
You can set the default values for copy, fax, email, scan and paper all at once.
1.Press Machine Setup on the control panel.
2.Press Admin Setting.
3.When the login message appears, enter password with number keypad and press OK. (See "Setting the authentication password" on page 29.)
4.Press the General tab > Default Settings > Default Option.
5.Press the function you want to change, and change its settings.
For example, if you want to change the default setting of the brightness
& darkness for a copy job, press Copy > Darkness and adjust the brightness & darkness.
6.Press OK.
IP setting using SetIP Program (Windows)
This program is for manually setting the network IP address of your machine using its MAC address to communicate with the machine. A MAC address is the hardware serial number of the network interface and can be found in the Network Configuration Report.
You can only use IPv4 setting for SetIP.
For using SetIP program, disable the computer firewall before continuing by performing the following:
1.Open Control Panel.
2.Double click Security Center.
3.Click Windows Firewall.
4.Disable the firewall.
Installing the program
1.Insert the driver CD provided along with your machine. When the driver CD runs automatically, close the window.
2.Start Windows Explorer and open the X drive. (X represents the name of your
3.Double-click Application > SetIP.
4.
5.Follow the onscreen instructions to complete the installation.
Starting the program
1.Connect your machine and the computer using network cable.
2.Turned on the machine.
3.From the Windows Start menu, select All Programs > Samsung Printers > SetIP > SetIP.
4. Click on the | icon (third from left) in the SetIP window to open the |
TCP/IP configuration window.
5.Enter the machine’s new information into the configuration window as follows:
•MAC Address: Find the machine’s MAC address from the Network Configuration Report and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8.
MAC address is a hardware serial number of the machine’s network interface and can be found in the Network Configuration Report. (See "Printing out the machine’s MAC address" on page 31.)
