Setting the Date and Time

The current date and time are shown on the display when your machine is on and ready to work. All of your faxes will have the date and time printed on them.

NOTE: If power to the machine is cut off, you need to reset the correct time and date once the power is restored.

1Press Menu until “Machine Setup” appears on the top line of the display.

2Press the scroll button (or ) to display “Date & Time” on the bottom line and press Enter.

3Enter the correct time and date using the number keypad.

Month

= 01 ~ 12

Day

= 01

~ 31

Year

= requires all four digits

Hour

= 01 ~ 12 (12-hour mode)

 

00

~ 23 (24-hour mode)

Minute

= 00

~ 59

NOTE: The date format may differ from each country.

You can also use the scroll button (or ) to move the cursor under the digit you want to correct and enter a new number.

4To select “AM” or “PM” for 12-hour format, press the or button or any number button.

When the cursor is not under the AM or PM indicator, pressing the or button immediately moves the cursor to the indicator.

You can change the clock mode to 24-hour format (e.g. 01:00 PM as 13:00). For details, see page 1.14.

5Press Enter when the time and date on the display is correct.

When you enter a wrong number, the machine beeps and does not proceed to the next step. If this happens, simply reenter the correct number.

Changing the Clock Mode

You can set your machine to display the current time using either 12-hour or 24-hour format.

1Press Menu until “Machine Setup” appears on the top line of the display.

2Press the scroll button (or ) until you see “Clock Mode” on the bottom line and press Enter.

The clock mode currently set for the machine displays.

3Press the scroll button (or ) to select the other mode and then press Enter to save the selection.

4To return to Standby mode, press Stop/Clear.

1.14 GETTING STARTED

Page 27
Image 27
Samsung SF-750 Series manual Setting the Date and Time, Changing the Clock Mode