Guidelines for Using Paper

For best results, use conventional 75 g/m2 (20 lb) paper. Ensure that the paper is of good quality, and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, voids, and curled or bent edges.

If you are unsure of what type of paper you are loading, such as bond or recycled paper, check the label on the package.

The following problems may cause print quality deviations, jamming or even damage to the machine:

Symptom

Problem with Paper

Solution

 

 

 

Poor print quality or toner

Too moist, too rough, too

Try another kind of paper,

adhesion, problems with

smooth or embossed; faulty

between 100 ~ 400 Sheffied, 4

feeding

paper lot

~ 5 % moisture content.

 

 

 

Dropout, jamming, curl

Stored improperly

Store paper flat in its moisture-

 

 

proof wrapping.

 

 

 

Increased gray background

Too heavy

Use lighter paper, use the rear

shading/machine wear

 

output slot.

 

 

 

Excessive curl problems

Too moist, wrong grain

Use the rear output slot.

with feeding

direction or short-grain

Use long-grain paper.

 

construction

 

 

 

 

Jamming, damage to

Cutouts or perforations

Do not use paper with cutouts or

machine

 

perforations.

 

 

 

Problems with feeding

Ragged edges

Use good quality paper.

 

 

 

 

 

 

NOTES:

Do not use letterhead paper printed with low-temperature inks, such as those used in certain types of thermography.

Do not use raised or embossed letterhead.

The machine uses heat and pressure to fuse toner to the paper. Insure that any colored paper or preprinted forms use inks that are compatible with this fusing temperature (200 °C or 392 °F for 0.1 second).

Paper Specifications

 

 

 

 

 

Category

Specifications

 

 

 

 

Acid Content

5.5 pH or lower

 

 

 

 

Caliper

0.094 ~ 0.18 mm (3.0 ~ 7.0 mils)

 

 

 

 

Curl in Ream

Flat within 5 mm (0.02 in.)

 

 

 

 

Cut Edge Conditions

Cut with sharp blades with no visible fray.

 

 

 

 

Fusing Compatibility

Must not scorch, melt, offset or release hazardous

A

 

emissions when heated to 200 °C (392 °F) for 0.1

 

second.

 

 

 

Grain

Long Grain

 

 

 

 

Moisture Content

4 % ~ 6 % by weight

 

 

 

 

Smoothness

100 ~ 400 Sheffied

 

 

 

 

A.7

Page 92
Image 92
Samsung SF-750 Series manual Guidelines for Using Paper, Paper Specifications, Category Specifications