Display

Meaning

Suggested solutions

 

 

 

Load Document

You have attempted to set up

Load a document and try again.

 

a copy or fax operation with

 

 

no document loaded.

 

 

 

 

Low Heat Error

There is a problem in the

Unplug the power cord and plug it

 

fuser unit.

back in. If the problem persists,

Open Heat Error

 

please contact a service

 

 

[Over Heat]

 

representative.

 

 

 

 

 

[LSU Error]

A problem has occurred in

Unplug the power cord and plug it

 

the LSU (Laser Scanning

back in. If the problem persists,

 

Unit).

please call for service.

 

 

 

Memory Full

The memory is full.

Delete unnecessary documents,

 

 

retransmit after more memory

 

 

becomes available or split the

 

 

transmission into more than one

 

 

operation.

 

 

 

[No Answer]

The remote fax machine has

Try again. Make sure that the

 

not answered after several

remote machine is operational.

 

redial attempts.

 

 

 

 

No. Not

The one-touch or speed dial

Dial the number manually using the

Assigned

location you tried to use has

number keypad or assign the

 

no number assigned to it.

number. For storing a number, see

 

 

page 2.15.

 

 

 

[No Paper]

The paper tray has run out of

Load paper in the paper tray. See

Add Paper

paper.

page 1.8.

 

 

 

Operation Not

You are in the Add/Cancel

Check the display to see if there are

Assigned

operation, but there are no

any scheduled jobs. The display

 

jobs waiting.

should indicate them in Standby

 

 

mode, for example, DelayFax.

 

 

 

[Paper Jam 0]

Paper has jammed in the

Clear the jam. See page 6.3.

Open/Close Door

feeding area of the paper

 

 

tray.

 

 

 

 

[Paper Jam 1]

• Paper has jammed in the

• Clear the jam. See page 6.5.

Open/Close Door

 

paper exit area.

 

 

• Clear the jam. See page 6.6.

 

• A paper jam has occurred in

 

 

 

the manual feeder or the

 

 

machine detects non-feeding

 

 

from the manual feeder.

 

 

 

 

[Paper Jam 2]

Paper has jammed in the

Clear the jam. See page 6.4.

Check Inside

fuser area.

 

 

 

 

[Power Failure]

Power has turned off then on

You need to restart the job you were

 

and the machine’s memory

trying to do before the power

 

has not been saved.

failure.

 

 

 

6.8 TROUBLESHOOTING

Page 81
Image 81
Samsung SF-750 Series manual Load Document