3
Making a Copy
7
NOTE: If you are using envelopes or card stocks, you don’t need to set the paper size.
Press Menu.
The display shows “Paper Setting” on the top line and the first item, “Paper Type,” on the bottom line.
1
Setting the Paper Type and Size for the Manual Feeder
After loading paper in the manual feeder, you need to set the correct paper type and size using the control panel buttons.
To set the paper size for the manual feeder:
After copying, close the rear cover.
4
Open the rear cover to use the rear output slot.
3

2

2Press Enter to access the menu item.

3Use the scroll button (or ) to find the paper type you are using and press Enter to save it.

4Press the ❿button to scroll to “Paper Size” and press Enter to access the menu item.

5Use the scroll button (or ) to display “Manual Feed” on the bottom line. Press Enter to access the menu item.

6Use the scroll button (or ) to find the paper size you are using and press Enter to save it.

To return to Standby mode, press Stop/Clear.

1Load documents of up to 50 pages face down into the ADF and adjust the document guides to the document size.

See page 2.2 for further details about preparing a document and loading it into the ADF.

2Customize the copy settings including number of copies, copy size, darkness and original type by using the control panel buttons. See the following section.Sorts the copy job. For example, if you make 2 copies of 3 page documents, one complete 3 page document will print followed by the second complete document. see page 2.14

To clear the settings, use the Stop/Clear button. Press Start Copy/Fax.

BASIC FUNCTIONS 2.11

Page 44
Image 44
Samsung SF-750 Series manual Basic Functions