Clearing Document Jams

When a document jams while it passes through the ADF (Automatic Document Feeder), “[Document Jam]” appears on the display.

1Remove the remaining documents from the ADF.

2Pull the jammed document gently out of the ADF. Skip to step 5.

If there is any resistance and the document does not move when you pull it, continue to the next step.

3Open the control panel by gripping its top and pulling on it.

4Pull the document gently out of the ADF and close the control panel.

5Load the documents back into the ADF.

NOTE: To prevent document jams, do not use thick, thin or mixed documents.

CAUTION: When closing the ope control, strongly push the LCD projection part in the center portion of ope control. If it is not fully closed, JAM is likely to occur.

6.2 TROUBLESHOOTING

Page 75
Image 75
Samsung SF-750 Series manual Clearing Document Jams