Samsung SLM3320NDXAA manual From the SyncThru Web Service, ID admin Password sec00000, Settings

IPv6 configuration

• Accessing menus may differ from model to model (see "Accessing the menu" on page 30).

•It may be necessary to press OK to navigate to lower-level menus for some models.

1 Select (Menu) > Network > TCP/IP (IPv6) > DHCPv6 Config on the control panel.

2Press OK to select the required value you want.

•Router: Use DHCPv6 only when requested by a router.

•Always Use: Always use DHCPv6 regardless of router request.

•Never Use: Never use DHCPv6 regardless of router request.

11

From the SyncThru™ Web Service

Activating IPv6

1Access a web browser, such as Internet Explorer, from Windows. Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and

press the Enter key or click Go.

2If it’s your first time logging into SyncThru™ Web Service you need to log-in as an administrator. Type in the below default ID and password.

We recommend you to change the default password for security reasons.

•ID: admin

•Password: sec00000

3When the SyncThru™ Web Service window opens, move the mouse cursor over the Settings of the top menu bar and then click Network

Settings.

4Click TCP/IPv6 on the left pane of the website.

5Check the IPv6 Protocol check box to activate IPv6.

6Click the Apply button.

7Turn the machine off and turn it on again.

2. Using a Network-Connected Machine 143