Samsung SLM3820DWXAA, SLM3320NDXAA manual Machines without a display screen

Wireless network setup

Machines without a display screen

Connecting in PBC mode

1Press and hold the (WPS) button on the control panel for about 2 - 4 seconds until the status LED blinks quickly.

The machine starts connecting to the wireless network. The LED blinks slowly for up to two minutes until you press the PBC button on the access point (or wireless router).

2Press the WPS (PBC) button on the access point (or wireless router).

aThe light blinks fast on the WPS LED. The machine is connecting to the access point (or wireless router).

bWhen the machine is successfully connected to the wireless network, the WPS LED light stays on.

3Insert the supplied software CD into your CD-ROM drive, and follow the instructions in the window to set up the wireless network.

Connecting in PIN mode

1The network configuration report, including PIN, must be printed (see "Printing a network configuration report" on page 130).

In ready mode, press and hold the (Stop/Clear)button on the control panel for about 5 seconds. You can find your machine’s PIN.

2Press and hold the (WPS) button on the control panel for more than 4 seconds until the status LED stays on.

The machine starts connecting to the access point (or wireless router).

3You need to enter the eight-digit PIN within two minutes on the computer that is connected to the access point (or wireless router).

The LED blinks slowly for up to two minutes until you enter the eight- digit PIN.

The WPS LED blinks in the order below:

aThe light blinks fast on the WPS LED. The machine is connecting to the access point (or wireless router).

bWhen the machine is successfully connected to the wireless network, the WPS LED light stays on.

4Insert the supplied software CD into your CD-ROM drive, and follow the instructions in the window to set up the wireless network.

2. Using a Network-Connected Machine 150