●● Analogue Clean View

"" This function is available for analogue channels only.

●● Auto Motion Plus

"" When LED Clear Motion is set to On, the screen appears darker than when it is Off.

"" If LED Clear Motion is set to On, at 60Hz video signal, the screen may flicker.

●● Film Mode

"" This function is only available when the input signal is TV, AV, Component (480i, 1080i), or HDMI (1080i).

●● HDMI UHD Color

""

""

If you set the HDMI connection to On, the TV turns off and then on automatically.

The HDMI connection with HDMI UHD Color set to Off supports up to UHD 50P/60P 4:2:0 input signals, while the HDMI connection with HDMI UHD Color set to On supports up to UHD 50P/60P 4:4:4 and 4:2:2 input signals. For more information, refer to "Supported Resolutions for UHD Input Signals".

"" For the SUHD models, each HDMI connection can be individually optimised for HDMI UHD Color. For the UHD models, make sure to connect to the HDMI IN 1 port of the TV.

"" When you connect the TV to the external device that supports only UHD 24 or 30 Hz frequency or any FHD frequency, the HDMI UHD Color function may not be available. In this case, set HDMI UHD Color to Off.

●● HDMI Black Level

"" This function is only available when the input signal, connected to the TV via an HDMI connector, is set to RGB444.

●● Dynamic Contrast●● Colour Tone

"" Cool and Standard are only available when Picture Mode is set to Dynamic.

"" Colour Tone is only available when the TV is connected to a computer via an HDMI-to-DVI cable.

●●

White Balance

●●

Gamma

●●

RGB Only Mode

●●

Colour Space

●●

Reset Picture

●●

Smart LED

"" This function is not available on certain models in specific geographical areas.