Samsung WW80J5355MW/AD, WW70J5355MW/AD manual Operations, Control panel

Operations

Control panel

01

02	10
	08
	11
	09

03 04 05 06 07

01	Cycle Selector	Turn the dial to select a cycle.
02	Display	The display shows current cycle information and estimated time
		remaining, or an information code when a problem occurs.
03	Temp.	Press to change the water temperature for the current cycle.
04	Rinse	Press to change the rinse count for the current cycle. You can set
		the rinse count to a max of 5, depending on the cycle.
		Press to change the spinning speed for the current cycle. The
		revolutions per minute (RPM) differs with the model.
		•	Rinse Hold	: The final rinse process is suspended so that the
			laundry remains in the water. To unload the laundry, run a
			drain or spin process.
05	Spin	•	No Spin	: The drum does not rotate after the final drain
			process.

•Spin Only : To run the Spin Only cycle, press Spin for

3 seconds. When the cycle time and spinning speed appear, press Spin repeatedly until a desired spinning speed is selected. Then, press Start/Pause to start the cycle. The spinning time depends on the selected cycle.

	Press to select an option from Intensive, and Pre Wash. Press
06 Options	again to deselect.

•Availability of the options depends on the cycle.

Operations

English  33 

Untitled-13 33

2017-06-27 ￿￿ 2:41:20