2MENU-SPECIFIC SETTINGS
12. HDD SET
This screen provides information regarding the hard disk.
(1)
(2)
(1)Hard disk capacity
This item displays the total capacity of the hard disk. If hard disk expansion is carried out, a value will be displayed for each disk.
(2)MIRRORING
This item displays settings relevant to
[Settings] ( indicates default setting.)
| Setting | Description | ||
| ON | Mirroring recording is carried out. | ||
|
|
|
|
|
OFF | Mirroring recording is not carried out. | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
zMirroring
When hard disk expansion has been carried out, the same video can be recorded to both hard disks in a process known as “mirroring”. Even if a problem occurs in the writing of video data to one of the disks, it will be possible to extract normal data from the other disk when this function is turned on.
(3)PLAYBACK DRIVE
This item indicates which of the hard drives will be used to provide video for playback when mirroring has been turned on.
[Settings] ( indicates default setting.)
Setting | Description |
*** | Mirroring is not carried out. |
|
|
DISK1 | Playback data is read from disk1. |
|
|
DISK2 | Playback data is read from disk2. |
|
|
zThe “***” will be displayed for “PLAYBACK DRIVE” when only one hard disk is being used or when “MIRRORING” is set to “OFF”. Settings can not be made in these cases.
zWhen this setting is made after hard disk expansion, the hard disks will be initialized and all recorded video will be lost. If any important recordings are stored on the hard disks, they should be stored on a separate data storage device before making this setting.
13. NETWORK SET
Network settings must be made in advance on the unit whenever it is to be controlled via a network. Once this has been done, settings can then be changed from the controlling PC.
zChanging network-related settings
When these settings are modified, connection will be canceled and control rights will be returned to the unit. To restore the connection, repeat network settings on the PC to match the modified unit settings.
(1)
(2)
(3)
(4)
(5)
(6)
2
1 Change the settings as required.
| Item | Description | |
(1) | IP ADDRESS | Allows the unit’s IP address to be | |
modified. | |||
|
| ||
|
|
| |
(2) | SUBNET MASK | Allows the unit’s subnet mask to be | |
|
| modified. | |
(3) | GATEWAY | Allows the unit’s gateway to be modified. | |
|
|
| |
|
| Allows the unit’s port number to be | |
(4) | PORT | modified. Set within the range of 1 to | |
|
| 65535. (default setting: 80) | |
|
|
|
NETWORK SETTINGS
22 | English |
