Sanyo DSR-3506P manual Display SET, Setting alarm triggers, External alarm detection

2MENU-SPECIFIC SETTINGS

Setting alarm triggers

Set the alarm triggers (i.e., launch signals) that constitute operation conditions for alarm recording as follows.

10

11

10 Select a launch signal for alarm recording using “ALARM TRIGGER” from the pull-down menu on the screen.

[Settings] (‹ indicates default setting.)

	Setting	Description
‹ALARM		Starts recording when an external alarm is
		activated.
	SENSOR	Starts recording when a motion sensor is
		activated.
	ALARM AND	Starts recording when both an external alarm
		and a motion sensor are activated
	SENSOR	simultaneously.
	ALARM OR	Starts recording when an external alarm or a
		motion sensor is activated independent of the
	SENSOR
		other.

zExternal alarm detection

The term “external alarm detection” is used to describe input of an external detection signal from a door switch or the like to the unit's alarm input terminal.

zMotion sensor detection

The term “motion sensor detection” is used to refer to detection of motion on the monitor in accordance with motion sensor settings.

zThe setting of motion sensors is carried out using the digital video recorder.

11 Click [SAVE].

The new settings is saved.

10. DISPLAY SET

Set conditions for the display of data on the unit’s monitor by selecting “ON” or “OFF” for each item.

(2)	(1)
		SETTINGS	NETWORK
	(3)
(6)
(4)
	(5)
	(7)
	2

zThese settings apply to information displayed on the monitor connected to the unit, not to the PC monitor’s display information.

1 Select “ON” or “OFF” for each data display item.

	Item	Default	Description
		setting
(1)	DATE	ON	Sets whether the current date or
			recording date will be displayed.
(2)	TIME	ON	Sets whether the current time or
			recording time will be displayed.
(3)	QUALITY	ON	Sets the picture quality for recording
			or playback.
(4)	AUDIO	ON	Sets the display condition for audio
			recording.
(5)	ALARM	ON	Displays the number of recorded
	COUNT		alarms.
			Sets the alarm recording type.
	ALARM		z For alarm recording:
(6)		ON	“ALARM” is displayed
	TYPE
			z For pre-alarm recording.
			“PRE” is displayed
(7)	TITLE	ON	Sets the display condition for camera
			title.

2 Click [SAVE].

The on-screen data display conditions are set or modified.

20 English