5SAVING RECORDED IMAGES

You can use the procedures described below to copy recorded images to the hard disk’s archive area or to download images to a PC or the like.

These functions should be used to backup important images from the normal recording area and the alarm recording area.

zCopied data is stored one image at a time. Moving images can be copied by setting the number of images required from the first copied image.

zIn a single copy operation, a maximum of 10,000 images can be copied to the archive area and a maximum of 1,000 images can be downloaded to a PC.

zIn certain cases where network-busy is detected as a result of hardware conditions, the network may be forcibly disconnected in order to protect DVR recording operations. Furthermore, the network will be forcibly disconnected in response to a command to send a large amount of data in a single operation (in particular, when 100 images or more are to be saved), and in such a case, a limit should be applied to the number of images based on the hardware configuration in question.

zWhen the archive area becomes full of images, these images are to be downloaded to a CompactFlash card or the like, and [AREA FULL RESET] from the recording area settings on the MAIN MENU should be clicked. (JP. 13)

zSaving is only possible during full-screen display and not when multi-screen display is used.

Copying to the archive area

(2)

(1)

(3)

(4)(5)

(1)Recording date/time: The recording date and time for the image currently being played back

(2)PLAYBACK AREA:

The area in which the image currently being played back is recorded

zNORMAL zALARM

(3)HOW MANY: Setting for the number of images to be stored

(4)Message box: Displays the state of progress for copying

(5)[START]: Starts copying

1 Play an image from the normal recording area or the alarm recording area.

2 Click the button at the start of the image to be copied.

Playback of the image is paused.

3 Click the

button on the operation

panel.

 

The COPY screen is displayed.

4 Input the number of images into “HOW MANY”.

Specifically, indicate the number of images after the start image to be copied in succession.

Setting range: 1 to 10,000

A warning message will be displayed if an invalid number is entered here.

5 Click [START].

Copying to the archive area will begin and the message box will display the current state of progress.

[Settings]

Setting

Description

 

 

Copying

“COPYING TO ARCHIVE AREA!”

 

 

Copying completed

“COPY FINISHED!”

 

 

zThe COPY screen cannot be displayed when playing video from the archive area.

6 When copying has been completed,

click the button to display live

video or the button to display playback video.

English

37

Page 38
Image 38
Sanyo DSR-3506P manual Saving Recorded Images, Copying to the archive area, Click, Input the number of images into HOW Many