SATO CL608VA, CL612VA manual Memory Card Function Expand Memory Area, Command Structure ESCEXa

Section 4. Programming Reference

Memory Card Function

Expand Memory Area

Command Structure <ESC>EXa
	a	=	Memory Designation
				CL408	CL412		CL608	CL612
		a	0	= Use Printer Memory		0	= Use Printer Memory
			1	= Use Slot 1		1	= Use Slot A
			2	= Use Slot 2		2	= Use Slot B

	Example:		<ESC>EX1
	Placement:		In its own data stream imediately after powering on.
	Default:		None
Command Function	This command expands the memory available to image labels by
	using the Memory Card.
Input to Printer	<ESC>A
	<ESC>EX2
	<ESC>Z
Printer Output	There is no printer output as a result of this command.
Special Notes	1.	You must have the optional Memory Card to use this command.
		Call your local SATO representative for details.
	2.	When the printer is turned off, the the Memory Card is reset to
		normal operation.
	3.	If the Memory Card specified already contains data, it cannot be
		used for memory expansion.
	4.	The printer will reserve the specified Memory Card for expanded
		memory until it is turned off or receives another <ESC>EX
		Expand Memory Area command.
	5.	Use care with Line and Box commands as excessively long lines
		can damage the print head.
	6.	The maximum vertical position that can be specified by the
		<ESC>V vertical position command is shown in the table below:

SATO CL Series Printers 9001035 Rev. E Page 4-83