SATO CL608VA Custom Protocol Command Codes Download, Command Structure ESCLD,a,b,c,d,e,f,g,h,i

Section 4. Programming Reference

Custom Protocol Command Codes

Download

Command Structure <ESC>LD,a,b,c,d,e,f,g,h,i

a= Replacement character for STX in ASCII or hex format

b= Replacement character for ETX in ASCII or hex format

c= Replacement character for ESC in ASCII or hex format

d= Replacement character for ENQ in ASCII or hex format

e= Replacement character for CAN in ASCII or hex format

f= Replacement character for NULL in ASCII or hex format

g= Replacement character for OFFLINE in ASCII or hex format

h= Auto-Online. Printer powers up in the On Line mode.

0 = Yes

1 = No

i= Zero Slash. Places a slash through the “0” character. 0 = Yes

1 = No

	Example:	<ESC>LD,{,},%,#,&,*,~,0,0
	Placement:	Immediately following the <ESC>A Start command and in
	an independent data stream.
	Default:	Standard Protocol command Codes
Command Function	Allows the user to defines custom Protocol Command codes.
Printer Input	<ESC>A
	<ESC>LD,{,},%,#,&,*,~,0,0
	<ESC>Z
Printer Output	A Protocol Command code status label will be printed as a result of
	the a successful download of a custom set of Protocol Command
	codes.

STX = 7B	ETX = 7D	ESC = 25
ENQ = 23	CAN = 26	NULL = 2A
OFFLINE = 7E
AUTO ONLINE =		YES
ZERO SLASH =		YES

Press the “FEED” key to activate the User Default or power the printer off to ignore them.

SATO CL Series Printers 9001035 Rev. E Page 4-97