55
Power Wiring, continued
Servo Motor
Holding-Brake
Control
Functional
Description
A 24V holding brake in the servo motor is controlled directly by the 17S drive
through software-selectable BRAKE parameter settings. The time and functional
relationships between the ENABLE signal, speed setpoint, speed and br aking force
are shown in the following diagram.
During the fixed ENABLE delay time of 100 ms, the speed setpoint of the drive is
internally driven down a 10 ms ramp to 0V. The 3 % region of actual speed is
scaled to VLIM.
Note: The set and release times of the holding brake vary with the se rvo mot or a nd
thus must be considered when setting parameters.
Continued on next page