10. Wrap theWeight Cable (52) around a 2" Pulley(4).
Attach thePu]Yeyto the RightArm (16) with a 3/8" x
13/4" BOlt(40) and 3/8" N/lock Nut (6).
Lay the Weight Cable (52) over a 3 1/2" Pulley (5).
Attach a Cable Trap (67) and the Pulleyto theside
of the Upright (9) with a 3/8" x 1 3/4" Bolt (40)
and 3/8" N/lock Nut (6}. '_ake sure thatthe Cobb
Trap is in the "12 o'clock" position.
1I. Wrap the Weight Cable (52) under a 2 3/4' Pulley
(13). Attach the Pulley to the bracket on the side of
the Moment Arm (74) with a 3/8" x 13/4" Bolt
(40) and 3/8" Nylock Nut (6).
Attach theend oFtheWeight Cable (52) tothe right
side oF the LegDeveloper (23)with a 3/8" x 2" Bolt
(45) and 3/8" Nylock Nut (6). Do not overfighten
the Nylock Nut, the Cable must be able to swivel
freely or it will be damaged.
12. Insertthe threaded bolt on the end oFthe Weight
Cable (52) into theAdjustment Bracket(53). Thread
the 5/16" Nut (82) exactly two complete turns onto
the threaded boil
13. Wet the upper ends of the Left and Right Arms (15,
16) and theinsides of the two Large Pads (17) with
soapy water. Slide theLarge Podsonto theArms.
Attach theBackrest(19) to theUpright (9) w_ two1/4" x2 1/2" Bolts (46).
10
4O
11
12
6