Sharp 3500, 4500 Scanning Settings, Manually Setting The Scanning Size, Touch the ORIGINAL key

SCANNING SETTINGS

(ORIGINAL SIZE, RESOLUTION, AND EXPOSURE)

When sending an image, you can adjust the original size, resolution, and exposure settings as needed.

MANUALLY SETTING THE SCANNING SIZE

If you load an original that is not a standard size (such as an AB size), or if you wish to change the scanning size, touch the ORIGINAL key and set the original size manually. Perform the following steps after loading the document in the automatic document feeder or on the document glass.

NOTE

Standard sizes that can be detected are as follows:

5-1/2"x8-1/2", 8-1/2"x11", 8-1/2"x11"R, 8-1/2"x14", 11"x17". If a non-standard size original is loaded (including special sizes), the closest standard size may be displayed, or the original size may not appear at all.

1 Touch the ORIGINAL key.

STANDARD

RESOLUTION

AUTO 81/2 X11

ORIGINAL

If you wish to select an AB size, touch the ABINCH key and then touch the desired original size key.

						AB is highlighted and AB
						size keys are displayed. To
	ORIGINAL SIZE
					OK	return to the inch palette,
AUTO			MANUAL
						touch the AB INCH key
A5		B5R		B4	OK
						once again.
A5R		A4		A3
					AB

B5 A4R INCH

2 Touch the MANUAL key.

The sizes that can be

ORIGINAL SIZE

selected are displayed.

4 Touch the outer OK key.

UTO	MANUAL
2-SIDED	2-SIDED	ST
BOOKLET	TABLET

ROTATE THE IMAGE 90 DEGREE

NOTE

OK

LA4

OK

You will return to the initial screen. (Pressing the inner OK key in the step above returns you to step 2.)

If you wish to rotate the original 90° when creating an image file, click the "Load the original so that the image is oriented horizontally" checkbox (a checkmark should appear in the box).

3 Touch the desired original size key.

						AUTO is no longer
						highlighted. MANUAL and
	ORIGINAL SIZE
					OK	the original size key you
AUTO				MANUAL
						touched are highlighted.
51/2 X81/2		51/2 X81/2 R			OK
81/2 X11		81/2 X11R			AB
81/2 X14			11X17		INCH

5 The selected size appears in the top half of the ORIGINAL key.

STANDARD

RESOLUTION

A4

ORIGINAL

NOTE

You can return to automatic detection by pressing the CA key.

13