Sharp 350LP Address directory screen alphabetically ordered, One-touch key display, ABC GROUP key

CONDITION SETTING SCREEN OF SCANNER MODE

■Address directory screen (alphabetically ordered)

If you have set the initial screen to the address directory screen using the key operator program, the initial screen will appear as follows.

Destinations stored using the Web page are grouped in indexes () according to the letter entered in "Initial" for each destination, and the name entered in "Display Name" is displayed in the one-touch key ().

READY TO SEND.

SHARP CORPORATION

TPS

CONDITION

SETTINGS

SHARP GROUP

D DESKTOP

E

F

ADDRESS REVIEW

G

H DESKTOP

FREQUENT USE

ABCD

EFGHI

JKLMN

OPQRST

UVWXYZ

ABC

GROUP

E-mail Destination Management page

GROUP1 GROUP2 GROUP3 GROUP4 GROUP5 GROUP6 ABC GROUP

One-touch key display

This shows the one-touch keys that have been stored on the selected "index card". The key type is indicated by the icon at the right.

:Scan to E-mail, Internet-Fax

: Scan to FTP

: Scan to Desktop

The display is initially set to show 8 keys. This can be changed to 6 or 12 using the key operator program. (Refer to page 26.)

Display switching keys

In cases where the one-touch keys cannot all be displayed on one screen, this shows how many screens are left. Touch the "" "" keys to move through the screens.

CONDITION SETTINGS key

This displays the condition setting screen (previous page), which is used to set various conditions.

ABC GROUP key

Touch this key to switch between the alphabetical index and the group index.

Index keys

One-touch key destinations are stored on each of these index cards (alphabetical index or group index). Touch an index key to display the card.

Group indexes make it possible to store one-touch keys by group with an assigned name for easy reference.This is done with the custom settings (refer to page 5). Frequently used one-touch key destinations can be stored on the FREQUENT USE card for convenient access.

NOTE

The screen showed above is the alphabetical address directory. If desired, the initial screen can be set to the group address directory (refer to page 26).

7