Sharp AM-300 manual Receiving Faxes AM-400 only, Selecting the Reception Mode, FAX only mode

4. Receiving Faxes (AM-400 only)

Selecting the Reception Mode

The machine has two modes for receiving faxes:

FAX ONLY mode:

Select this mode when you only want to receive faxes on your line. The machine will automatically answer all calls on one ring and receive incoming faxes. (“FAX” will appear in the fax mode display.)

EXT. TEL mode:

Select this mode when you have connected an extension phone as explained on page 19 and you want to receive both faxes and voice calls on the line connected to the machine. All calls, including faxes, must be answered by picking up the extension phone. (“TEL” will appear in the fax mode display.)

To select the reception mode, follow the steps below.

♦The reception mode is initially set to FAX ONLY mode.

1 Make sure that the date and time display of fax mode appears (if needed

press FAX ) and then press MENU .

Display:

FAX SETTING

2

3

4

5

Press	.		1:RECEPTION MODE
Press	.		1: FAX ONLY
Select the reception mode:			The display briefly shows
			your selection, then:
: FAX ONLY		: EXT. TEL	2: NUMBER OF RING

Press repeatedly to exit.

When FAX ONLY is selected:

10/03 11:37 FAX

When EXT. TEL is selected:

10/03 11:37 TEL

98