Sharp AM-300 manual Reception Ratio, 101, Press Auto to select automatic

Using EXT. TEL Mode

Reception Ratio

The machine has been set at the factory to automatically reduce the size of received documents to fit the size of the printing paper. This ensures that data on the edges of the document are not cut off. If desired, you can turn this function off and have received documents printed at full size.

♦If a document is too long to fit on the paper, the remainder will be printed on a second page. In this case, the cut-off point may occur in the middle of a line.

♦Automatic reduction may not be possible if the received document is too large, contains too many fine graphics or images, or is sent at high resolution. In this case, the remainder of the document will be printed on a second page.

1	Make sure that the date and time			Display:
	display of fax mode appears (if needed			FAX SETTING
	press FAX	) and then press MENU .
2
	Press	.
				1:RECEPTION MODE
3
	Press	.
				1: AUTO
4
	Press	(AUTO) to select automatic		The display briefly shows
				your selection, then:
	reduction, or		(100%) to select full-
				4: POLLING
	size printing.

5 Press repeatedly to exit.

Receiving	Faxes
4.

101