Sharp AM-300 manual Storing numbers in a Group, Press To select SET

Broadcasting (Sending a Fax to Multiple Destinations)

Storing numbers in a Group

Groups allow you to send a fax to a group of fax machines by simply specifying the appropriate Group. To store a selection of numbers in a Group, follow the steps below.

♦Two groups are available, Group 1 and Group 2.

♦Up to 100 numbers can be stored in each Group.

Only Speed Dial numbers can be stored in a Group. Full numbers cannot be stored.

1 Make sure that the date and time	Display:
	FAX SETTING
display of fax mode appears (if needed
press FAX ) and then press MENU .

2

3

Press	.	1: SPEED DIAL
Press	.	1: SET, 2: CLEAR

4

Press	to select SET.	The first available
		Group appears:

•Note which Group number (Group 1 or Group 2) appears in the display. This is the number of the Group you are storing.

GROUP 1

ENTER SPEED # OR

SELECT BY ,

5

6

Select a destination using one of the methods below.

•Enter the 2-digit Speed Dial number of the destination.

• Press Z	or	A until the name of the destination appears in the display
(if no name was stored, the number will appear).
Press ENTER	to store the destination.

92