Sharp AM-300 manual Using an Extension Phone to Send a Fax, Default Line Monitor setting

Using an Extension Phone to Send a Fax

Default Line Monitor setting

The default setting for Line Monitor (listening to the line and fax tones through the speaker during a fax transmission) is initially MONITOR OFF. If desired, you can change the default setting to MONITOR ON.

1 Make sure that the date and time display of fax mode appears (if needed

press FAX ) and then press MENU .

Display:

FAX SETTING

2

3

4

Press	twice.	1: MONITOR ON
Press	to select MONITOR ON or	The display briefly shows
		your selection, then:
to select MONITOR OFF.		4: TIMER SEND

Press repeatedly to exit.

Using an Extension Phone to Send a Fax

If you have connected an extension phone as explained on page 18, you can use the extension phone to send a fax.

♦ Using an extension phone to send a fax allows you to listen to the line and talk to the other party before faxing.

♦ This procedure cannot be used when the machine is busy with another job. Note that if the transmission is not sucessful because the line is busy or a line error occurs, automatic redialling will not take place.

1 Make sure that the date and time display of fax mode appears (if needed

FAX

press ).

88