Sharp AM-300 manual Setting the Date and Time AM-400 only

Setting the Date and Time (AM-400 only)

Setting the Date and Time (AM-400 only)

The date and time appear in the fax mode display and are printed at the top of every page you fax. Set the date and time as explained below.

♦If you will not be using fax mode, the date and time do not need to be set.

♦Note that the date and time will need to be reset if the machine is unplugged or a power failure occurs. When the date and time need to be set, the following messages appear in fax mode:

01/01 00:00 FAX DATE/TIME UNSET

					MENU
			QUALITY			CONTRAST
					MENU
			E-SORT			REDIAL
			ZOOM	Z	A	BROADCAST
COPY	SCAN	FAX	!
			DUPLEX SCAN PRINT STOP		ENTER	SPEED

FAX

ENTER

1 Make sure that the date and time display of fax mode appears (if needed

press FAX ) and then press MENU .

Display:

FAX SETTING

2 Press .

1: DATE&TIME SET

3	Press	.	The currently set	DATE 01-01-2005
			date appears:
4
	Enter a two-digit number for the day
	(“01” to “31”).

Example: the 5th

DATE 05-01-2005

• To correct a mistake, press Z .

48