Sharp AM-300 manual See Selecting Temporary Fax Settings on, Speed Dialling Press

Sending a Fax

3 The default temporary fax settings are as follows. To change a setting,

see Selecting Temporary Fax Settings on page 80.

•Resolution: STANDARD

(Note: The default resolution setting can be changed as explained on page 87.)

•Contast: NORMAL

•Duplex Scan: OFF

•Line monitor: OFF

(Note: The default Line Monitor setting can be changed as explained on page 88.)

Note: After temporary fax settings are selected, the settings will revert to the above default settings if the auto clear time elapses without any keys being

pressed on the operation panel (see page 52). You can also press to reset the settings to the default settings.

4 Enter the number of the receiving machine using one of the following methods:

•Direct Keypad Dialling: Press the number keys to enter the fax number.

Note: If a pause is required between any of the digits to access a special

REDIAL

service or an outside line, press . The pause will appear as a hyphen. Several pauses can be entered in a row.

• Speed Dialling: Press	SPEED
	and enter the 2-digit Speed Dial number that

has been stored for the receiving fax machine (see page 75).

SPEED

Example: Speed Dial 01:

•Search Dialling: If you cannot remember which Speed Dial number you

stored a destination in, you can press Z or A until the destination

appears in the display (the name programmed for the destination will appear, or the fax number if no name was programmed).

72