Sharp ER-A440 instruction manual Selection of X1/Z1 and X2/Z2 reports, 2620 . Å

Selection of X1/Z1 and X2/Z2 reports

to be printed in the stacked report sequence PGM 2 2620

Your register is equipped with the stacked report printing function that enables multiple X/Z reports to be printed in sequence with only a single request, up to maximum of 13 reports*. This function continuously prints a maximum of 13 kinds of reports with a single operation.

Procedure

2620

.

Å

To cancel the stacked report sequence

For full reporting (non-range report)

*1

*2

*2

Å

Startparameterrange

Å

Endparameterrange

:

;

Job no.

For individual reporting

To repeat*

*: Maximum 70 steps are programmable. “1 step” means the memory size used for one no-range type job no. The range type job no. needs “8 steps”.

Job code numbers to be used are as follows.
*1				*2
	Job no.	Report	Available mode		Range parameter
	00	General report
	10	Full department report	X1/X2 mode only
	13	Full department group report	X1/X2 mode only
	20	PLU report			*3 Start PLU code/end PLU code (1 through 999999)
	27	PLU zero sales report	X1/X2 mode only
	29	PLU price category report	X1/X2 mode only		*3 Start price amount/end price amount
	30	Transaction report	X1/X2 mode only
	31	Total in drawer report	X1/X2 mode only
	32	Commission sales report
	40	Full clerk report
	50	Full cashier report
	60	Hourly sales information	Range report is available		*3 Start time/end time (0 through 2330)
			only in the X1 mode.
	70	Daily net report	X1/X2 mode only

*3: Both range setting and full setting are allowed.

Note

When Z of stacked report is initiated, X only reports will be skipped.

Example Key operation Print

2620 . Å

10 :

13 :

;

61