Sharp MX-4501N, MX-2700N, MX-2300G, MX-3501N, MX-2300N, MX-2700G, MX-3500N, MX-4500N manual Fax Inch

SPECIFYING THE SEND SIZE OF THE ORIGINAL

Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If a send size smaller than the scan size is selected, the image will be reduced.

• The send size cannot be specified when [Long Size] is selected for the scan size, or when the scan size is specified by numerical values.

• The send size cannot be specified when [TIFF-S] is selected for the format. (The send size is fixed at A4R (8-1/2" x 11"R).)

Internet Fax

Mode Switch

Image

Settings

Send Settings

1 Manual RX

(1)

	Auto		Address Book
Exposure
200X100dpi		TIFF-F	Address Entry
Resolution		File Format	Special Modes
Auto	A4	Special Modes	File

Original

Quick File

(2)

Display the original settings screen.

(1)Touch the [Image Settings] key.

(2)Touch the [Original] key.

	Internet Fax			100%	OK
	Original	Scan Size			Send Size
		Auto	A4		Auto
2	2-Sided			Image Orientation
	Booklet

2-Sided Tablet

Touch the [Send Size] key.

Internet	Fax	AB	Inch	OK
Original
Auto		A5	B5R	B4

Manual A5R A4 A3

B5	A4R
A4

3

(1)(2)

Specify the send size.

(1)Touch the desired send size key.

(2)Touch the [OK] key.

•Size keys that cannot be specified for the send size are greyed out to prevent selection.

•To specify an inch size for the send size, touch the [AB Inch] key to highlight the [Inch] side and then specify the send size.

Internet	Fax		141%	OK
Original	Scan Size			Send Size
	Auto	A4		A3

2-Sided	Image Orientation
Booklet

2-Sided Tablet

4

(1)(2)

Specify the orientation in which the original is placed.

(1)Touch the "Image Orientation" key with the same orientation as the original image.

If this setting is not correct when sending an image with a changed ratio, a suitable image may not be transmitted.

(2) Touch the [OK] key.

The ratio used for reduction or enlargement of the original will appear between the "Scan Size" and the "Send Size".

71