Sharp MX-M350U, MX-M350N, MX-M450N Cancelling a FAX Transmission, Cancelling ON-HOOK Dialing

PRIORITY TRANSMISSION OF A STORED JOB

If you have an urgent transmission job and multiple transmission jobs have already been stored, you can give priority to the urgent job so that it will be transmitted immediately after the job currently being executed. This is done from the job status screen. For details on using the job status screen, refer to page 1-15 of "Operation manual (for general information and copier operation)".

1 Press the [JOB STATUS] key.

3 Touch the key of the job to which you wish to give priority.

The touched key is highlighted.

4 Touch the [PRIORITY] key.

2 Touch the [FAX JOB] key.

WAITING

DETAIL

WAITING

PRIORITY

AITING

DETAIL

AITING

PRIORITY

AITINGSTOP/DELETE

FAX JOB

The selected job moves up to the next position after the job currently being executed.

When the current job is completed, execution begins of the job selected in step 3.

2

WAITINGSTOP/DELETE

FAX JOB

NOTE

If the job in progress is a broadcast transmission job (see page 3-2) or a serial polling job (see page 3-13),the priority job will temporarily interrupt the job after the transmission currently in progress is finished. When the priority job is finished, the broadcast transmission or serial polling job will resume. However, if the priority job is also a broadcast transmission or serial polling operation, the job is begun after all transmissions of the current broadcast or serial polling job are completed.

CANCELLING A FAX TRANSMISSION

You can cancel a transmission job that is in progress or has been stored. Cancellation is done from the fax job status screen. (Printing of a received fax cannot be cancelled.)

1 Press the [JOB STATUS] key.

2 Touch the [FAX JOB] key.

WAITING

DETAIL

WAITING

PRIORITY

WAITINGSTOP/DELETE

FAX JOB

3 Touch the key of the job that you wish to cancel.

The touched key is highlighted.

4 Touch the [STOP/DELETE] key.

		A message appears to
		confirm the cancellation.
AITING
	DETAIL	Touch the [YES] key to
AITING
	PRIORITY
		delete the	selected	job
AITING	STOP/DELETE	key and	cancel	the
		transmission.
FAX JOB

NOTES

If you do not wish to cancel the transmission, touch the [NO] key.

"CANCEL" will appear in the Transaction Report of a job that is cancelled.

CANCELLING ON-HOOK DIALING

To cancel on-hooking dialing (dialing by touching the [SPEAKER] key and then the numeric keys) when you need to redial the number or because transmission was interrupted, touch the [SPEAKER] key once again.

2-9