Sharp MX-M450U Call timer at memory sending, Recall in case of line busy, Turn OFF Recall

KEY OPERATOR PROGRAMS

Call timer at memory sending

When sending a fax by automatic transmission (See "Storing transmission jobs (memory transmission)" on page 2-8.), this setting lets you select the amount of time that the machine waits before breaking the connection when the other machine does not respond to your machine's calling tone. If the other machine does not respond within this set time, your machine will automatically break the connection. Time selections are 30 seconds, 45 seconds, and 60 seconds. This setting is normally set to 45 seconds.

Date/own number print position setting

This setting lets you select the position (inside or outside the original image) of the sender's name and number that are printed at the top of each fax page you send. Normally OUTSIDE THE ORIGINAL IMAGE is selected. To have your name and number printed inside the original image, select INSIDE THE ORIGINAL IMAGE. For more detailed information on the position of each setting, refer to "Position of sender's information" on page 3-11.

Quick on line sending

When this setting is turned on, the machine will call the other machine and start transmitting the document as soon as the first page is scanned. Transmission therefore takes place at the same time as any further pages are being scanned. Normally this setting is turned on.

If you turn the setting off, transmission will not begin until all pages of the document have been scanned. Note that this setting does not apply to manual transmission. (See "Storing transmission jobs (memory transmission)" on page 2-8.)

Recall in case of line busy

This program is used to set the number of recall attempts and the interval between recall attempts when a transmission is not successful due to the line being busy or other reason.

Normally the machine is set to make 2 recall attempts at intervals of 3 minutes.

The number of recall attempts and the interval between attempts that can be set in each country are shown in the following table.

Country Differentiation Table

	United	Canada	Australia and
	Kingdom		New Zealand
The number of	1 to 10	1 to 14	1 to 9
recall attempts
The interval
between	any number of minutes from 1 to 15
attempts

If you do not wish recalling to take place, select

[TURN OFF RECALL].

NOTE

Even if this setting is turned on, your machine will not re-attempt the call when a document is sent by manual transmission.

Recall in case of communication error

When sending a document, this setting is used to select whether your machine will re-attempt the call if the transmission fails due to a line error.

Normally the machine is set to make 1 recall attempts at intervals of 3 minutes*1.

The number of recall attempts can be set to only 1 time*2, and the interval between attempts can be set to any number of minutes from 1 to 15. If you do not wish recalling to take place, select [TURN OFF RECALL].

*1. Note that in United Kingdom, the interval between attempts can be set to 1 minute.

*2. Note that in United Kingdom, the number of recall attempts can be set to any number 1 to 5.

NOTE

Even if this setting is turned on, your machine will not re-attempt the call when a document is sent by manual transmission.

8-8