Sharp MX-M350N Press the System Settings key, Touchkey. the Administrator Settings, Guide

[SYSTEM SETTINGS] Key

The [SYSTEM SETTINGS] key on the operation panel is called the [CUSTOM SETTINGS] key in the Operation manual (for facsimile). When configuring system settings, refer to the illustration below. At other places in the Operation manual that refer to the "Custom Settings", substitute "System Settings".

Location in Operation manual	When using the MX-M350U/	Applicable function	Operation manual page
(for facsimile)	M450U/M350N/M450N		(chapter)
		USING THE TRANSFER	Page 3-18
		FUNCTION
	SYSTEM	Changes in the fax reception	Page 5-2
	SETTINGS
		function
		STORING, EDITING, AND	Page 6-2
		DELETING AUTO DIAL
		KEYS AND PROGRAMS
		STORING A GROUP INDEX	Page 6-9
		PROGRAMMING,	Page 6-10
		EDITING, AND DELETING
	SYSTEM	FCODE MEMORY BOXES
		EDITING AND DELETING	Page 6-14
	B STATUS SETTINGS
		A MEMORY BOX
		PRINTING PROGRAMMED	Page 6-14
		INFORMATION
		ADMINISTRATOR	Chapter 8
		SETTINGS*

* With respect to the administrator settings, see the following.

2. ADMINISTRATOR SETTINGS

The "Administrator Settings" in the system settings are referred to as "Key Operator Programs" in the Operation manual (for facsimile). For explanations of the administrator settings for the fax function, see chapter 8, "KEY OPERATOR PROGRAMS", in the Operation manual (for facsimile).

At places in the Operation manual (for facsimile) that refer to the "Key Operator Programs", substitute "Administrator Settings".

Due to this change, steps 1 to 3 on pages 8-3 and 8-11 are as follows.

1 Press the [SYSTEM SETTINGS] key.

SYSTEM

B STATUS SETTINGS

2 Touchkey. the [ADMINISTRATOR SETTINGS]

SENDER CONTROL	FAX DATA
	RECEIVE/FORWARD

3 Enter the administrator password (5-digit number) with the numeric keys.

The factory default administrator password

ADMINISTRATOR PASSWORD is indicated on page 2 of Administrator settings

guide.

For the steps that follow, see pages 8-3 and 8-11 of the Operation manual (for facsimile).

ADMINISTRATOR SETTINGS