Sharp MX-M350N Programming, Touch the Address Control key, Touch the Direct Address, Program key

PROGRAMMING

Auto dial numbers (one-touch keys and group keys), user indexes, and memory boxes are stored, edited and deleted at the operation panel of the machine.

STORING, EDITING, AND DELETING AUTO DIAL KEYS AND PROGRAMS

This section explains the procedures for storing, editing, and deleting auto-dial keys (one-touch keys and group keys) and programs, which simplify the transmission procedure. (The procedure for using one-touch keys and group keys is explained in "TRANSMISSION BY AUTO-DIALING" on page 2-4and the procedure for using programs is explained in "USING A PROGRAM" on page 3-17.)

Acombined total of 999 (maximum of 500 on the AR-M351U/AR-M451U) one-touch keys and group keys can be stored, and eight programs can be stored. If you attempt to store more than this, a warning message will appear. In this case, delete any auto-dial keys or programs that are no longer needed (refer to pages 6-5,6-7and 6-8), and then store the new auto-dial key or program.

NOTE

To cancel a storing, editing, or deleting operation, press the [CA] key. You will return to the main screen.

To store, edit, or delete an auto-dial key (one-touch key or group key) or program, first follow steps 1 through 4 below. In the screen of step 4, touch the appropriate key for storing, editing, or deleting.

1 Press the [CUSTOM SETTINGS] key.

4 Touch the desired key and perform the programming operation.

Refer to the pages indicated below for the operation you wish to perform.

		CUSTOM SETTINGS
		DIRECT ADDRESS / PROGRAM			OK
			STORE
		INDIVIDUAL	GROUP	PROGRAM	AMEND/DELETE
2 Touch the [ADDRESS CONTROL] key.
		[INDIVIDUAL] key		[PROGRAM] key
		Store a one-touch		Store a program key
ADDRESS CONTROL	SE	dial key (following		(page 6-8)
		page)

DOCUMENT FILING	[GROUP] key	[AMEND/DELETE]
	Store a group key	key
CONTROL
	(page 6-6)	• One-touch key
		(page 6-5)

Touch the [DIRECT ADDRESS /	• Group key (page 6-7)
3 PROGRAM] key.	• Program (page 6-8)

The direct address / program menu appears.

DIRECT ADDRESSPROGRAM

CUSTOM INDEX

NOTE

Destinations in programs must be stored using one-touch keys. For this reason, if no one-touch keys have been stored, the [PROGRAM] key will be greyed out.

6-2