Sharp MX-M350U Setting for F-CODE Relay Broadcast Memory Boxes Recipient, Address selection

PROGRAMMING, EDITING, AND DELETING F-CODE MEMORY BOXES

SETTING FOR F-CODE RELAY BROADCAST MEMORY BOXES (RECIPIENT)

Program the end receiving machines to which document data received in the F-code relay broadcast memory box will be transmitted when your machine is a relay machine.

Up to 30 end receiving machines can be programmed. If you attempt to program more than this number, a message will appear and programming will not be possible.

1 Touch the [RELAY BROADCAST] key in step 3 of "PROGRAMMING AN F-CODE MEMORY BOX" on pages 6-10 to 6-11 and store a box name, sub-address, and passcode.

2 Touch the [RECIPIENT] key.

The address selection

BOX NAME	FAX INFORMATION	screen appears.
SUB ADDRESS	123456/987654

RECIPIENT

3 Touch the one-touch keys you wish to include as end receiving machines.

Touch indexes and the keys as needed.

F-CODE MEMORY BOX / RELAY BROADCAST

SELECT ADDRESS.

OK

B

1/1

DIRECT ENTRY

A

ADDRESS REVIEW

C GROUP

CLIFF QUIROGA

DANIEL ERNY

* 2

FREQUENT USE

ABCD

EFGHI

JKLMN

OPQRST

UVWXYZ

ABC

GROUP

The selected one-touch keys are highlighted and programmed as end receiving machines.

If you touch an incorrect key, touch the key again to remove the highlighting and delete the destination.

You can also use the [ ] key (speed dial key) to store a one-touch key. (See "SENDING A FAX BY SPEED DIALING" on page 2-4.)

To enter a fax number that has not been stored in a one-touch key, to enter a full fax number with the numeric keys, touch the [DIRECT ENTRY] key and then the [FAX] key and enter the fax number.

		OK
FAX
E-MAIL	DIRECT ENTRY
INTERNET-FAX	ADDRESS REVIEW
JKLMN OPQRST UVWXYZ	ABC	GROUP

Enter the fax number and then a sub-address and transmission settings (if desired) as explained in steps 10 to 13 and 15 of "STORING ONE-TOUCH DIAL KEYS" on pages 6-3 to 6-4, and then touch the [OK] key twice to return to the screen of step 3.

4 To check the destinations that have been selected as end receiving machines, touch the [ADDRESS REVIEW] key.

					OK	The		destinations
						selected		as	end
		1/2
						receiving machines are
			DIRECT ENTRY			displayed.
						You	can	delete	a
			ADDRESS REVIEW
	* 0
						destination		by touching
OPQRST		UVWXYZ				it.	When		the
			ABC	GROUP

confirmation message appears, touch the [YES] key to delete the destination.

5 Touch the [OK] key in the screen of step 3.

You will return to the screen of step 2 and the number of stored as end receiving machines will appear.

6 To exit, touch the [EXIT] key. To program another memory box, touch the [NEXT] key.

Touching the [EXIT] key returns you to the screen of step 3 on page 6-10.

Touching the [NEXT] key returns you to the screen for programming a new memory box (the screen of step 4 on page 6-10).

6

6-13