Sharp MX-M450U, MX-M350N Touch the Print PIN key, Use the numeric keys to enter a 4-digit number

PROGRAMMING, EDITING, AND DELETING F-CODE MEMORY BOXES

SETTING FOR F-CODE CONFIDENTIAL TRANSMISSION MEMORY BOXES (PRINT PIN)

Program the print PIN (Personal Identification Number) that is used to print a document that has been received to an F-code confidential memory box. For information on using a print PIN, refer to "PRINTING A DOCUMENT RECEIVED TO AN F-CODE CONFIDENTIAL MEMORY BOX" on page 4-7.

NOTES

Program a 4-digit number for the print PIN. The characters " " and "#" cannot be used. The print PIN can not be omitted.

Take care not to forget the print PIN that you have programmed. If you forget the passcode, consult your Sharp dealer.

1 Touch the [CONFIDENTIAL] key in step 3 of "PROGRAMMING AN F-CODE MEMORY BOX" on pages 6-10 to 6-11 and store a box name, sub-address, and passcode.

2 Touch the [PRINT PIN] key.

BOX NAME	FAX INFORMATION
SUB ADDRESS	55112233/481221
PRINT PIN

3 Use the numeric keys to enter a 4-digit number.

F-CODE MEMORY BOX / CONFIDENTIAL			NEXT	EXIT
	No.003
PRINT		PIN	CANCEL	OK
ENTER		THE PRINT PIN VIA THE 10-KEY PAD,THEN PRESS [OK].

If you make a mistake, press the [C] key. All digits will be cleared, so you will need to re-enter the number from the first digit.

To cancel entry of the print PIN, touch the [CANCEL] key. You will return to the screen of step 2 without programming a print PIN.

4 Touch the [OK] key.

You will return to screen of step 2 and the entered print PIN will appear.

5 To exit, touch the [EXIT] key.
To program another memory box, touch
the [NEXT] key.
NEXT	EXIT	Touching the [EXIT] key

returns you to the screen of step 3 on page 6-10.

Touching the [NEXT] key returns you to the screen for programming a new memory box (the

screen of step 4 on page 6-10).

6-12