Sharp MX-M350N ENLARGING/REDUCING the Image Before Transmission, Touch the key under Send Size

Touch the OK key.

SENDING A FAX

ENLARGING/REDUCING THE IMAGE BEFORE TRANSMISSION

Follow these steps to enlarge or reduce the scanned image before transmission.

1 Make sure the machine is in fax mode.

4 Check the original size.

When the [IMAGE SEND] key light is on, the machine is in fax mode. If the light is not

SCAN SIZE

AUTO A3

100%

If the original size has not been correctly detected, touch the key under [SCAN SIZE] and specify

FAX MODE SWITCH

on, press the [IMAGE SEND] key.

If the network scanner option is installed, touch

2-SIDED 2-

BOOKLET TA

the original size. (See

"MANUALLY SETTING THE SCANNING SIZE" on page 1-8)

E-MAIL/FTP

INTERNET FAX

SPEAKER

FAX

MODE SWITCH

the [MODE SWITCH] key and then the [FAX] key to switch to fax mode.

When fax mode is selected, "FAX" appears in the top half of the [MODE SWITCH] key.

NOTE

A long size, stored size, or non-standard size cannot be specified for the original scanning size.

5 Touch the key under [SEND SIZE].

			If the key under [SEND
	SEND SIZE
			SIZE] is	greyed out,
00%
		AUTO
			specify	a	standard

original size in step 4.

2-SIDED TABLET

2 Load the original.

Using the automatic document feeder: Page 1-7

Using the document glass: Page 1-7

If you are using the document glass to send multiple pages, load the first page first.

NOTE

You cannot load documents in both the automatic document feeder and on the document glass and send them in a single fax transmission.

3 Touch the [ORIGINAL] key.

RESOLUTION

AUTO A3

ORIGINAL

6 Touch the key of the desired enlargement or reduction size.

A5	A4	The [AUTO] key is no
		longer highlighted. The
A5R	A4R	[MANUAL] key and the
		selected size key are
B5	B4	highlighted.

B5R

7

8 Check the enlargement or reduction ratio and touch the [OK] key.

SPEAKER RESEND

SEND SIZE OK

70%

A4

2-SIDED TABLET

9 Continue from step 4 of "BASIC PROCEDURE FOR SENDING FAXES" (pages 2-2to 2-3).

NOTE

After the transmission is stored, the [CA] key can be pressed to cancel enlargement/reduction transmission.

2-6