STORING, EDITING, AND DELETING AUTO DIAL KEYS AND PROGRAMS

STORING A GROUP KEY

A group of numbers can be stored in a group key. The numbers can be stored by touching one-touch keys (see "STORING ONE-TOUCH DIAL KEYS" on pages 6-3to 6-4) or by directly entering full numbers with the numeric keys. Up to 500 (maximum of 300 on the AR-M351U/AR-M451U) destinations can be stored in a group key.

To program a group key, follow steps 1 through 3 on page 6-2, touch the [GROUP] key in step 4, and then follow these steps.

1 Follow the same steps 1 through 8 of

"STORING ONE-TOUCH DIAL KEYS" (pages 6-3to 6-4)to enter a [GROUP NAME], [INITIAL], and [INDEX].

steps 10 to 13 and 15 of "STORING ONE-TOUCH DIAL KEYS" on pages 6-3to 6-4,and then touch the [OK] key twice to return to the screen of step 3. To check the destinations that you have stored in the group, touch the [ADDRESS REVIEW] key.

*In step 2 on page 6-3,touch the [GROUP NAME] key instead of the [NAME] key.

2 Touch the [ADDRESS] key.

AL

GROUP-DIGITAL DOCUMENT

X

USER 2

ADDRESS

AME

 

 

OK

1/2

DIRECT ENTRY

ADDRESS REVIEW

* 0

OPQRST

 

UVWXYZ

 

 

 

GROUP

 

 

ABC

 

A list of the destinations appears.

To delete a destination, touch the key of the destination and then touch the [YES] key in the message that appears.

3 Touch one-touch keys of the destinations that you wish to store in the group.

Touch index keys and the keys as needed.

DIRECT ADDRESS / GROUP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SELECT ADDRESS.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B CORP.

 

 

 

 

 

 

 

1/2

 

 

 

DIRECT ENTRY

 

 

 

 

A CORP.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ADDRESS REVIEW

 

 

 

 

C GROUP

 

 

 

 

 

SHARP CORPORATION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CORPO.TPS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

* 4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FREQUENT USE

 

ABCD

 

EFGHI

 

 

JKLMN

 

OPQRST

 

UVWXYZ

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ABC

 

 

GROUP

 

 

The selected destinations are highlighted and stored in the group key.

If you touch the wrong key, simply touch it again to cancel the highlighting and remove the destination from the group.

NOTE

Keys that are greyed out are group keys. Group keys cannot be selected.

You can also use the [ ] key (speed dial key) to store a one-touch key. (See "SENDING A FAX BY SPEED DIALING" on page 2-4.)

To enter a full fax number with the numeric keys, touch the [DIRECT ENTRY] key and then the [FAX] key and enter the number.

 

 

OK

FAX

 

 

E-MAIL

DIRECT ENTRY

INTERNET-FAX

ADDRESS REVIEW

 

 

JKLMN OPQRST UVWXYZ

ABC

GROUP

Enter the fax number and then a sub-address and transmission settings (if desired) as explained in

4 Touch the [OK] key in the screen of step 3.

You will return to the screen of step 2. The number of selected destinations will appear next to the [ADDRESS] key.

5 Check the name of the key (refer to step 14 on page 6-4).

The characters appearing next to the [KEY NAME] key will be displayed in the group key. To change these characters, touch the [KEY NAME] key. This step is not necessary if you do not wish to change the characters.

For information on entering characters, see chapter 7 of the "Operation manual (for general information and copier operation)".

6 Touch the [EXIT] key when you have finished programming the group key.

If you wish to program another group key, touch the [NEXT] key.

When you touch the [EXIT] key, you will return to the screen of step 4 on page 6-2.

To store another group, touch the [NEXT] key.

6-6

Page 76
Image 76
Sharp MX-M350N, MX-M450N, MX-M450U Storing a Group KEY, Touch the Address key, Touch the OK key in the screen of step