CHAPTER 1. GENERAL DESCRIPTION
[1] Specifications
Automatic dialing: | Rapid Key Dialing: 10 numbers |
| Speed Dialing: 20 numbers |
Fax paper: | Initial starter roll (included with fax |
| machine): 10 m roll |
| Recommended replacement roll: |
| |
Automatic document feeder: | 10 sheets max. |
Paper cutting method: | Automatic cutter |
Modem speed: | 9600 bps with automatic fallback to |
| 7200, 4800, or 2400 bps |
Transmission time* : | Approx. 15 seconds (Sharp special mode) |
Display: | 7 x 5 dots, 1 line by |
Reception modes: | TEL, FAX, TEL/FAX, ANS. |
Resolution: | Horizontal: |
| 8 dots/mm |
| Vertical: |
| Standard: 3.85 lines/mm |
| Fine/Halftone: 7.7 lines/mm |
| Super fine: 15.4 lines/mm |
Recording system: | Thermal recording |
Halftone (grayscale): | 64 levels |
Applicable telephone line: | Public switched telephone network/PBX |
Compatibility: | |
Configuration: | |
Compression scheme: | MH, MR, Sharp special mode |
Scanning method: | |
Effective recording width: | 210 mm max. |
Input document size: | Automatic feeding: |
| Width ⎯ 148 to 216 mm |
| Length ⎯ 140 to 297 mm |
| Manual feeding: |
| Width ⎯ 148 to 216 mm |
| Length ⎯ 140 to 600 mm |
Effective scanning width: | 210 mm max. |
Contrast control: | Automatic/Dark selectable |
Copy function: | Standard |
Telephone function: | Standard |
| (cannot be used for incoming/outgoing |
| if power fails) |
Power requirements: | |
Operating temperature: | 5 to 35°C |
Humidity: | Maximum: 85 % |
Power consumption: | |
| Maximum: 120 W |
Dimensions: | Width: 308 mm |
| Depth: 256 mm |
| Height: 138 mm |
Weight: | Approx. 2.6 kg |
| (without attachements) |
*Based on
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for procduct improvement without prior notice. The performance specifications figures indicated are nominal values of production units. There may be some deviation from these values in individual units.
1 – 1
