Sending a Fax by Automatic Dialling

Sending a Fax by Automatic Dialling

You can store up to 30 fax or phone numbers in the machine for automatic dialling.

Auto-dial numbers are dialled by pressing until the desired number

appears in the display, and then SPEICHERSTART/ .

Storing fax and phone numbers for automatic dialling

1

Press FUNKTION once and

Display:

once.

 

 

 

<NEW NUMBER>

2

Press

once.

ENTER FAX #

3 Enter the fax or voice number by pressing the number keys. Up to 32 digits can be entered. (Note: A space cannot be entered.)

To clear a mistake, press .

If a pause is required between any of the digits to access a special service or an outside line, press FUNKTION . The pause appears as a hyphen. Several pauses can be entered in a row.

If you are on a Flash-type PBX and are storing a number for an outside line,

press R , press FUNKTION to insert a pause, and then enter the fax or voice number. (When you dial the auto-dial number, you will automatically dial out without the need to press the R key.)

If you are on a PBX that requires dialing a number to dial out and are storing a number for an outside line, enter the number, press FUNKTION to

insert a pause, and then enter the number of the receiving machine. (When you dial the auto-dial number, you will automatically dial out without the need to dial the number for an outside line.)

Sending

Faxes

2.

 

31

Page 33
Image 33
Sharp UX-P400 operation manual Sending a Fax by Automatic Dialling, Storing fax and phone numbers for automatic dialling