Sending a Fax From Memory

6 When you are ready to begin transmission, press SPEICHERSTART/ .

A Transaction Report is automatically printed out after Broadcasting is completed. Check the "Note" column of the report to see if any of the locations are marked "Busy" or have a communication error code. If so, send the document to those locations again.

Memory transmission

You can also send a fax through memory when sending to a single location. This is convenient when sending to locations where the line is often busy, as it saves you from waiting to pick up the original document and frees the feeder for other operations.

To send a fax through memory, load the document, press SPEICHERSTART/ , and then

dial using one of the following methods:

Press the number keys to enter the fax number and then press SPEICHERSTART/ .

Press repeatedly to select an auto-dial number and press SPEICHERSTART/ .

Press once to select the last number dialled and press SPEICHERSTART/ .

If the memory becomes full...

If the memory becomes full while the document is being scanned, MEMORY IS FULL and SEE MANUAL will alternately appear in the display.

START/

Press SPEICHER if you want to transmit the pages which have been stored up

to that point in memory. The remaining pages will be ejected from the feeder. After transmission, the memory will be cleared and you can transmit the remaining pages. You will also need to transmit the page which was being scanned when the memory filled up.

Press STOP if you want to cancel the entire transmission.

38

Page 40
Image 40
Sharp UX-P400 operation manual Memory transmission, If the memory becomes full