Problems and Solutions

Dialling and transmission problems

Problem

Solution

 

 

No dial tone when you

• Make sure the handset cord is connected to the

pick up the handset or

correct socket. See Connecting the handset on

press the

key.

page 10.

 

 

 

Dialling is not possible.

• Make sure the power cord is properly plugged into

 

 

a power outlet.

 

 

• Make sure that the telephone line is properly

 

 

connected to both the TEL. LINE socket and the

 

 

wall socket.

 

 

The power is on, but no

• Make sure that the receiving machine has paper.

transmission takes place.

 

 

 

• Make sure that the telephone line cord is plugged

 

 

into the TEL. LINE socket, and not the TEL. SET

 

 

socket.

 

 

• If the receiving machine is in manual mode with no

 

 

attendant, reception will not be possible.

 

 

• Check the display for error messages.

 

 

• Pick up the handset and check for a dial tone.

 

 

Nothing is printed at the

• Make sure that the document for transmission is

receiving end.

 

placed face down in the feeder.

 

 

A distorted image is

• Noise on the telephone line may cause distortion.

received at the other end.

Try sending the document again.

 

 

• Make a copy of the document on your fax machine.

 

 

If the copy is also distorted, your fax machine may

 

 

need service.

 

 

 

102

Page 104
Image 104
Sharp UX-S10 manual Dialling and transmission problems, Correct socket. See Connecting the handset on