7UP and DOWN arrow keys

Enlarge/reduce setting: When making a copy of a document, press these keys to select an enlarge/reduce setting.

Volume setting: When a document is not in the feeder, press these keys to

change the speaker volume when the key has been pressed, or the ringer volume at any other time.

FUNCTION key settings: Press these keys after pressing the FUNCTION key to scroll through the FUNCTION MODE settings.

8Number keys

Use these keys to dial numbers, and enter numbers and letters when storing auto-dial numbers.

9Panel release

Press this release to open the operation panel.

10STOP key

Press this key to cancel an operation before it is completed.

11COPY/HELP/POLL key

When a document is in the feeder, press this key to make a copy of a document. When a document is not in the feeder, press this key to print out the Help List, a quick reference guide to the operation of your fax machine. This key is also used after dialling to poll (request fax transmission from) another machine.

12START/MEMORY key

Press this key after dialling to begin fax transmission. Press this key before dialling to send a fax through memory.

13SMS key

Press this key to send an SMS message, check received SMS messages, and access SMS settings.

14Left and right arrow keys

Auto-dial numbers: When sending a fax or making a phone call, press these keys to scroll through your auto-dial numbers, the “REVIEW CALLS” list (only available if you have Caller ID), and the last number dialled (redial).

FUNCTION key settings: Press the right arrow key after scrolling with the up and down arrow keys to select a FUNCTION key setting.

7

Page 9
Image 9
Sharp UX-S10 UP and Down arrow keys, Number keys, Panel release, Stop key, COPY/HELP/POLL key, START/MEMORY key, SMS key