Sharp UX-S10 manual Sending a fax by Direct Keypad Dialling, Load the documents

Sending a Fax by Automatic Dialling

Sending a fax by Direct Keypad Dialling

You can also enter a full number with the number keys and then press the

START/SPEICHER key to begin dialling. You can use this method to dial a full number

when you don't need to speak to the other party before faxing.

Note: Direct Keypad Dialling cannot be used to dial a number within the same PBX as your fax machine. To send a document to a fax machine in your PBX, use Normal Dialling.

1 Load the document(s).

•	AUFLÖ S./
	If desired, press EMPFANG to set the
	resolution and/or contrast.

READY TO SEND

2 Enter the number of the receiving machine by pressing the number keys.

•If a pause is required between any of the digits to access a special service

or an outside line, press FUNKTION . The pause will appear as a hyphen.

Several pauses can be entered in a row.

3 Check the display. If the number of the receiving machine shown is

correct, press START/SPEICHER .

• If the number is not correct, press STOP to backspace and clear one digit

at a time, and then re-enter the correct digit(s).

70