Optional Answering Machine Settings

Optional Answering Machine Settings

Setting ICM time

Incoming messages (ICMs) are the messages which callers leave for you on the built-in answering machine. The answering machine is set at the factory to allow each caller a maximum of 4 minutes to leave a message. If desired, you can change this setting to 15, 30, or 60 seconds.

1 Press FUNKTION once and

once.

Display:

A.M. SETTING

2

Press

once and

once.

RECORDINGTIME

 

3

Press

.

 

 

4

Press a number from 1 to 4 to select the desired ICM recording time.

 

1

15 seconds

3

60 seconds

 

2

30 seconds

4

4 minutes

The display briefly shows your selection, then:

REMOTE CODE

5 Press STOP to return to the date and time display.

Fax reception on A.M. failure

If the memory for recording incoming messages becomes full while you are out, the answering machine will no longer be able to record messages. The ON A.M. FAILURE setting is used to choose the response of the machine to incoming calls when this happens:

Automatic fax reception NO: The machine will answer after 10 rings, after which it will wait to receive a remote command. Most callers will hang up before it answers; however, when you call the machine from a remote location, you can wait until it answers, listen to your messages, and then erase them (see Remote Operations on page 53).

46

Page 48
Image 48
Sharp UX-S10 manual Optional Answering Machine Settings, Setting ICM time, Fax reception on A.M. failure, Seconds, Minutes