Sharp UX-S10 Loading Printing Paper, Insert the stack of paper into the tray, Print Side Down

Models: UX-S10

1 119
Download 119 pages 20.23 Kb
Page 17
Image 17

Loading Printing Paper

Loading Printing Paper

You can load up to 50 sheets of A4-size, 60 - 80 g/m2 paper in the paper tray (at room temperature; maximum stack height should not be higher than the line on the tray).

1 Fan the paper, and then tap the edge against a flat surface to even the stack.

Make sure the stack edges are even.

2 Insert the stack of paper into the tray, PRINT SIDE DOWN.

If paper remains in the tray, take it out and combine it into a single stack with the new paper.

Be sure to load the paper so that printing takes place on the print side of the paper. Printing on the reverse side may result in poor print quality.

GENTLY LOAD THE PAPER IN THE PAPER TRAY.

DO NOT FORCE THE PAPER DOWN INTO THE FEED SLOT.

The stack should not

be higher than this line

Note: Do not use paper that has already been printed on, or paper that is curled.

Note: If at any time the display shows the

 

 

 

 

ADD PAPER &

 

alternating messages at right, check the printing

 

 

 

 

paper. If the tray is empty, add paper. If there is

 

 

 

 

 

 

 

 

 

 

 

 

paper in the tray, take it out and then reinsert it.

 

 

 

 

 

 

 

 

When you are finished, press START/SPEICHER .

 

 

PRESS START KEY

 

 

 

 

 

 

 

 

 

 

 

1. Installation

15

Page 17
Image 17
Sharp UX-S10 manual Loading Printing Paper, Insert the stack of paper into the tray, Print Side Down