Messages and Signals

LINE ERROR

Transmission or reception was not successful. Press

 

the STOP key to clear the message and then try

 

again. If the error persists, see Line Error on page

 

101.

 

 

 

MEMORY IS FULL/

The memory is full. You may have too many

SEE MANUAL

messages recorded in the answering machine. To

(alternating messages)

erase messages, see page 45.

 

This message may also occur during fax reception if

 

too much data is received before the pages can be

 

printed out. If faxes have been received to memory

 

because printing is not possible (an additional

 

message will indicate the problem), resolve the

 

problem so that printing can continue (see Substitute

 

Reception to Memory on page 84). If you are

 

attempting to transmit from memory, see If the

 

memory becomes full on page 74. If you are copying,

 

see If MEMORY IS FULL appears on page 85.

 

 

MEMORY PRINTING

The fax is preparing to or printing out a document

 

from memory.

 

 

MESSAGES RCVD:XX

This indicates that you have received messages in

 

the answering machine. “XX” is the number of

 

messages.

 

 

NO DATA

This appears if you attempt to search for an auto-dial

 

number when none have been stored.

 

 

OFF HOOK

This appears if you forgot to replace the handset after

 

using it to dial and send a fax. Replace the handset or

 

press the STOP key to clear the message.

 

 

 

ON HOOK DIAL

The

key has been pressed and the fax machine

 

 

is waiting for you to dial.

 

 

 

108

Page 110
Image 110
Sharp UX-S10 manual 108